red plug: VCC
black plug: GND
blue plug: VEE
(the negative Voltage is not needed to operate the multiplexer)
|
|
Front view of the multiplexer, on the right side there are
the power connection plugs. The multiplexer has power
regulators on board, as supply voltage at least 6V..7V
are enough.
red plug: VCC black plug: GND blue plug: VEE (the negative Voltage is not needed to operate the multiplexer) |
|
|
All multiplexer cables are labeled as follows: number closest to the connector is the mux number, the other number is the channel number of the multiplexer. For example on the bottom of the picture one sees cable (0/0) which means multiplexer 0 cahnnel 0 and the next cable is labeled with (0/3) mutliplexer 0 channel 3. |
|
|
The connection between FED and multiplexer is done via a LEMO connector on the multiplexer. For installing this cable one has to open metal box. |